SCIENCEBRING   /   HAMBURG, GERMANY
Login Register
International Journal of Advance Scientific Research SCIENTIFIC IDEAS. INTERNATIONAL PERSPECTIVES.
ISSN 2750-1396 12 issues per year · Monthly
Crossref DOI: 10.37547/ijasr
Submit Manuscript ↗

Search the Journal
Articles Published:

Investigation of Methods for Extending the Service Life of Dies Made of SKD 11 Steel

Vol. 6 No. 06 (2026): Volume 06 Issue 06 Pages 10-17
Authors
  • Sh.N. Fayzimatov
    Professor, Department of Mechanical Engineering Technology, Fergana State Technical University, Fergana, Uzbekistan
  • L.X. Yusufjonov
    Master's student, Fergana State Technical University, Fergana, Uzbekistan
DOI 10.37547/ijasr-06-06-02 ↗
RESEARCH OVERVIEW

Abstract

The article investigates the main technological methods for extending the service life of dies manufactured from SKD 11 cold-work tool steel. SKD 11 steel is widely used in the production of stamping, cutting, forming and blanking tools due to its high hardness, wear resistance and dimensional stability after heat treatment. However, during operation, dies are exposed to intensive contact loads, abrasive wear, adhesive interaction, impact stresses and thermal effects, which gradually reduce their working capacity. In this study, the influence of heat treatment, nitriding and TiN coating on the wear resistance and durability of SKD 11 dies was analyzed. Particular attention was paid to the relationship between microstructure, surface hardness, residual stresses and operational stability of the die surface. The results of the analysis show that the service life of SKD 11 dies can be significantly increased by selecting an optimal heat treatment regime, applying surface hardening technologies and using protective coatings. Based on the obtained findings, technological recommendations were developed for improving the reliability, wear resistance and service life of dies used in mechanical engineering production.

Keywords

  • SKD 11 steel
  • wear resistance
  • heat treatment
SOURCES & CITATIONS

References

1. Totten, G. E. (Ed.). (2006). Steel Heat Treatment Handbook (2nd ed.). CRC Press, Taylor & Francis Group.
2. Roberts, G., Krauss, G., & Kennedy, R. (1998). Tool Steels (5th ed.). ASM International.
3. Dossett, J. L., & Totten, G. E. (Eds.). (2013). ASM Handbook, Volume 4A: Steel Heat Treating Fundamentals and Processes. ASM International.
4. ASM International. (1991). ASM Handbook, Volume 4: Heat Treating. ASM International.
5. Davis, J. R. (Ed.). (2002). Surface Hardening of Steels: Understanding the Basics. ASM International.
6. Holmberg, K., & Matthews, A. (2009). Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering (2nd ed.). Elsevier.
7. Bhushan, B. (2013). Introduction to Tribology (2nd ed.). John Wiley & Sons.
8. Podgornik, B., Hogmark, S., & Sandberg, O. (2004). Surface modification to improve friction and galling properties of forming tools. Journal of Materials Processing Technology, 155–156, 1399–1404.
9. Panjan, P., & Čekada, M. (2005). Protective coatings for tools used in metal forming. Surface and Coatings Technology, 200(5–6), 1330–1337.
10. Leskovšek, V., Podgornik, B., & Nolan, D. (2008). Modelling of residual stress profiles in plasma nitrided tool steel. Materials Characterization, 59(4), 454–461.
11. Podgornik, B., Leskovšek, V., & Vižintin, J. (2008). Influence of deep-cryogenic treatment on tribological properties of P/M high-speed steel. Materials and Manufacturing Processes, 23(6), 594–598.
12. Çelik, G. A., Şahin, O., & Yetim, A. F. (2023). Nitriding effect on the tribological performance of CrN-, AlTiN- and CrAlN-coated tool steels. Coatings, 13(3), 555.
13. Zagonel, L. F., Mittemeijer, E. J., & Alvarez, F. (2013). The microstructure of tool steel after low temperature ion nitriding. Surface and Coatings Technology, 235, 343–351.
14. Singh, H., & Kumar, P. (2022). Investigation of wear resistance of SKD11 tool steel. Materials Today: Proceedings.
15. Senthilkumar, T., & Ajiboye, T. K. (2012). Effect of heat treatment processes on the mechanical properties of medium carbon steel. Journal of Minerals and Materials Characterization and Engineering, 11(2), 143–152.
16. Gåård, A., Krakhmalev, P., & Bergström, J. (2006). Wear mechanisms in deep drawing of carbon steel. Wear, 261(11–12), 1288–1296.
17. Bell, T., & Sun, Y. (2002). Load bearing capacity of plasma nitrided steel under rolling-sliding contact. Surface Engineering, 18(6), 443–447.
18. Karamış, M. B., & Yıldızlı, K. (2010). Surface modification of cold work tool steels by nitriding and coating processes. Materials & Design, 31(4), 1988–1995.
19. Barshilia, H. C., & Rajam, K. S. (2004). Structure and properties of reactive DC magnetron sputtered TiN coatings. Bulletin of Materials Science, 27(1), 35–41.
20. Veprek, S., & Veprek-Heijman, M. G. J. (2008). Industrial applications of superhard nanocomposite coatings. Surface and Coatings Technology, 202(21), 5063–5073.
DISCOVER RELATED RESEARCH

Similar Articles

Continue exploring the collection ↗
1-10 of 91
CONTINUE YOUR READING

Most read articles by the same author(s)

Explore more published work ↗