Evaluation Of The Uncertainty In Determining The Compression Class Of A Compression Knitted Garment
DOI:
https://doi.org/10.37547/ijasr-06-01-05Keywords:
Testing, result processing, compression classAbstract
Accurate determination of the compression class is a key factor in ensuring the therapeutic effectiveness and quality of medical-purpose compression knitted garments. However, the reliability of compression class assessment is strongly influenced by measurement errors and uncertainties associated with testing procedures and data processing. This article addresses the problem of evaluating the measurement uncertainty in determining the compression class of compression knitwear. A systematic approach to uncertainty evaluation is proposed in accordance with international metrological requirements. The study is based on experimentally obtained parameters, including extensibility, working extensibility, residual deformation, surface density, and breaking load, which are used to classify compression garments according to standardized criteria. The developed uncertainty evaluation program allows for a comprehensive assessment of the accuracy of test results and enhances the objectivity and reliability of compression class determination. The findings of this study contribute to improving quality control procedures and ensuring compliance of medical compression garments with regulatory and performance standards.
References
1. GOST 31509:2012. Medical elastic, fixation, and compression products. General technical requirements. Test methods.
2. ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories [Electronic resource]. Available at: http://docs.cntd.ru/document/gost-isomek-17025-2019.
3. O‘zDSt ISO/IEC 17025:2019. General requirements for the competence of testing and calibration laboratories.
4. Guide to the Expression of Uncertainty in Measurement. ISO, Geneva, First Edition, 1995, 101 p.
5. O.Xakimov, N.Xanxadjaeva, F. Riskalieva. Opredeleniya klassa kompressii kompressionnogo trikotajnogo izdeliya i otsenivanie ih neopredelennosti //STANDART, 2019, № 4, p.10-13
6. Xakimov O.Sh., Muminov N.Sh., Gaziev G.A., Riskalieva F.M. Neopredelonnost opredeleniya klassa kompressii kompressionnogo trikotojnogo izdeliya. //Tezisi dokladov VII-ogo Mejdunarodnogo nauchno-texnicheskogo konfrentsii “Metrologiya, informatsionno-izmeritelnie texnologii i sistemi” (MIITS-2020), Kharkov, Ukraina, 18–19 fevralya, 2020, p. 141–142.
7. Khakimov O.Sh., Riskalieva F.M. Otsenivanie tochnostix xarakteristik opredeleniya klassa kompressii kompressionnogo trikotajnogo izdeliya //Sbornik nauchnix trudov Mejdunarodnoy konfrentsiya “Perspektivi i problemi metrologicheskogo obespecheniya innovatsionnix texnologiy”, Tashkent, Uzbekistan, May 18–19, 2021, p. 377–381.
8. Abdujabbor o’g’li, Y. A. (2022, April). Improving the quality of yarns by installing an additional compactor on the spinning machine. In E Conference Zone (pp. 280-282).
9. Ugli, Y. A. A., Tokhirovich, B. H., & Abdujabborovich, Y. S. (2021). Research into the effect of stretching couples on the quality of thread in a ring spinning machine
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jumayeva Maxliyo Baxtiyor qizi, Khakimov Ortagoli
This work is licensed under a Creative Commons Attribution 4.0 International License.
