INCREASING THE EFFICIENCY OF THE PROCESS OF SEPARATING LINTERS FROM COTTON SEEDS
DOI:
https://doi.org/10.37547/ijasr-05-01-11Keywords:
Process, performance, surfaceAbstract
Analysis of the studies conducted by domestic and foreign academic researchers to improve the lint separation process shows that the existing lint separation machines have high energy consumption and low process efficiency. The main reason for these shortcomings is the high coefficient of friction of the working surfaces of the lint separation machines that come into contact with the raw materials, and the rapid corrosion of the working surfaces is the cause of these problems. Especially in the autumn and spring months with high air humidity, the working surfaces are quickly corroded, causing a sharp increase in the coefficient of friction between the surface and the seed mass. This study focuses on the effect of the coefficient of friction on the parameters of the lint separation process and its reduction.
Downloads
References
Ergashev Sh.T., Sarimsakov O.Sh., Shokirov X.T., Sharifjanov A.O. (2023). O‘zbekiston Respublikasi Adliya vazirligining foydali modelga patenti № FAP 02331. Arrali tola ajratgich uchun kolosnik. Rasmiy axborotnoma.
Sarimsakov O.Sh., Shokirov X., Shamsiddinov E. (2023). Jin mashinasining samaradorligini oshirishga bag‘ishlangan ilmiy-tadqiqot tahlillari. Mashinasozlik ilmiy-texnika jurnali, Andijon, pp. 299-306.
Shokirov X.T. (2024). Tayyorlangan tarkibli kolosniklarning paxtani jinlash jarayoniga ta’sirini tahlili. Qurilish va ta’lim ilmiy jurnali, Namangan, №1 pp. 100-104.
Sarimsakov O.Sh., Ergashev Sh.T., Shokirov X.T. (2024). Yangi tarkibli kolosnik konstruksiyasining natijalari tahlili. Mexanika va texnologiya ilmiy jurnali, Namangan, Maxsus son, № 1(8). pp.190-198.
Sarimsakov O.Sh., Ergashev Sh.T., Shokirov X.T. (2024). Arrali tola ajratgich uchun tarkibli kolosnik konstruksiyasining sinov natijalar tahlili. Ilmiy-texnika jurnali, Farg‘ona, № 2. pp. 86-91.
Tursunovich, M. E., Ugli, U. A. A., & Esonaliyevich, R. S. (2024). Analysis of the effect mechanism and chemical composition of cooling lubricants in mechanical processing. Web of Technology: Multidimensional Research Journal, 2(11), 151-158.
Юлчиева, С. Б., Негматов, С. С., Негматова, К. С., Мамуров, Э. Т., Мадаминов, Б. М., & Рубидинов, Ш. Г. У. (2021). Повышение коррозионностойкости композиционных материалов с добавлением полимерных добавок. Universum: технические науки, (10-1 (91)), 48-52.
Eldor, M. (2022). Control of metal cutting process based on vibroacoustic signal. Universum: технические науки, (6-6 (99)), 63-67.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Eldor Mamurov, Olimjon Sarimsakov

This work is licensed under a Creative Commons Attribution 4.0 International License.