Articles
| Open Access |
https://doi.org/10.37547/ijasr-05-03-03
DETERMINING THE USEFUL SURFACE OF THE GRID USED IN THE CLEANING PROCESS AT COTTON GINNING ENTERPRISES
Abstract
The article analyzes the mesh surface, which is one of the main working parts of the raw cotton cleaning process at cotton ginning plants. The types and sizes of mesh surfaces used in cotton ginning plants, as well as their useful surface area, were determined using the Solidworks program. The useful surface angle of the mesh surface relative to the center of the spiked drum was determined at various values. As a result, graphs of the change in the useful surface relative to the center of the spiked drum are presented.
Keywords
Cotton, fiber, seed, lint
References
1. Salomova, M., Salokhiddinova, M., & Muradov, R. (2023, June). How to increase the effect radius of the cotton transport process in a mobile device. In AIP Conference Proceedings (Vol. 2789, No. 1). AIP Publishing.
2. Rahimov, F., Rajapova, N., & Salomova, M. (2019). R. Muradov Create a Device that can Remove Heavy Components from the Chassis Chamber. International Journal Advanced Research Science, Engineering and Technology//Of ijarset, 6(7), 2350-0328.
3. Якубов, И. (2021). Саломова Машхура, Маматқулов Орифжон. Чигит шикастланишини камайтириш мақсадида сепаратор конструкциясини такомиллаштириш// Халқаро илмий-амалий конференсия материаллари тўплами, 11(23), p647-649.
4. Саломова, М., Рахимов, Ф., & Қосимов, Х. (1992). Пневмотранспорт қурилмаси элементларини такомиллаштириш. Механика муаммолари. 2019й, 101-104.
5. Tokhirova, M., Khasanov, A., Salomova, M., Sarimsakov, O., & Muradov, R. (2023, June). To study the process of leveling raw cotton on the horizontal belt surface of the feeder. In AIP Conference Proceedings (Vol. 2789, No. 1). AIP Publishing.
6. Nodirbek, M., Shukhratjon, K., Mashkhura, S., & Akmal, U. (2024). STUDY OF THE DISTRIBUTION PROCESS IN PIPES IN THE DIFFERENT AIR FLOW TRANSMISSION ZONE. Universum: технические науки, 9(4 (121)), 47-49.
7. Саломова, М., Рахимов, Ф., & Қосимов, Х. (1992). Пневмотранспорт қурилмаси элементларини такомиллаштириш. Механика муаммолари. 2019й, 101-104.
8. Toshpo’latov Mansurbek, Komilov Shuxratjon Raximjon o’g’li, Salomova Mashhura Arabboy qizi, & Muradov Rustam Muradovich. (2024). PAXTA CHIGITINI TOZALASH QURILMALARINI ISHLASH TIZIMI TAXLILI. Новости образования: исследование в XXI веке, 2(18), 338–342. извлечено от http://nauchniyimpuls.ru/index.php/noiv/article/view/14695
9. Якубов, И. (2021). Саломова Машхура, Маматқулов Орифжон. Чигит шикастланишини камайтириш мақсадида сепаратор конструкциясини такомиллаштириш//Халқаро илмий-амалий конференсия материаллари тўплами, 11(23), p647-649.
10. Rahimov, F., Rajapova, N., & Salomova, M. (2019). R. Muradov Create a Device that can Remove Heavy Components from the Chassis Chamber. International Journal Advanced Research Science, Engineering and Technology//Of ijarset, 6(7), 2350-0328.
Article Statistics
Downloads
Copyright License
Copyright (c) 2025 Salomova Mashhura Arabboy qizi, Yuldashev Khurshid Khazratkulovich, Muradov Rustam Muradovich
This work is licensed under a Creative Commons Attribution 4.0 International License.