Technology for Assembling, Welding and Machining Dissimilar-Steel Welded Components: From Selecting the Welding Process to Assigning Cutting Conditions by Zone
DOI:
https://doi.org/10.37547/ijasr-06-10-04Keywords:
Dissimilar steels, gas tungsten arc welding, blank assemblyAbstract
This paper presents a systematic account of the manufacturing process for a precision component made from dissimilar steels 45 and 12Kh18N10T, from selecting the welding process and preparing the blanks to assigning zone-specific cutting conditions for subsequent machining. It classifies welding methods for dissimilar metals and justifies the selection of gas tungsten arc welding (TIG). The assembly and fixturing procedure is described, including a controlled process gap and a defined tack-welding sequence. The structure of the multipass weld and the procedure for depositing its layers are considered. In view of the differences in the mechanical properties of the materials, a differentiated finishing regime is justified for the component’s internal surface across three zones: steel 45, the weld transition zone and steel 12Kh18N10T.
References
1. Yuldashaliyevich K.Y. et al. “Improving the accuracy of components through turning” [English translation of the Uzbek title] // Mechanics and Technology. 2025. Vol. 6. Special Issue 1. Pp. 81–87.
2. Khusanov Y. et al. Prospective methods of improving productivity in mechanical processing of agricultural parts // BIO Web of Conferences. EDP Sciences, 2024. Vol. 141. Article 04002.
3. Khusanov Y.Y., Sattorov A.M. Analysis of the determination of the criteria for the erosion of turning tools in production // European Journal of Emerging Technology and Discoveries. 2023. Vol. 1, No. 2. Pp. 63–71.
4. Khusanov Y.Y., Qo‘ziboyev I.I. “Theoretical foundations of the technological process for machining shaped surfaces” // Scientific Progress. 2023. Vol. 4, No. 4. Pp. 53–60.
5. Khusanov Y.Y., Abdullayev B.I. “Ensuring the quality of the surface layer of components during high-speed face milling of hardened steels” [English translation of the Russian title] // Scientific Progress. 2022. Vol. 3, No. 3. Pp. 156–165.
6. Fayzimatov B.N., Khusanov Y.Y., Abduvoxidov S.Z.O.G‘L. Vibroacoustic signals in cutting metals // Scientific Progress. 2022. Vol. 3, No. 4. Pp. 118–126.
7. Fayzimatov U., Xodjimuxamedova M., Khusanov Y.Y. Analysis of the methods for assessing the reliability of spot welding machines in the automotive industry // Scientific Progress. 2022. Vol. 3, No. 4. Pp. 127–136.
8. Xusanov Y.Y. “Analysis of the economic efficiency of manufacturing body components” // Science and Education. 2022. Vol. 3, No. 11. Pp. 604–610.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Khusanov Yunusali Yuldashalievich, Tolipov Akhrorjon Nazirjon ugli
This work is licensed under a Creative Commons Attribution 4.0 International License.