Articles | Open Access | https://doi.org/10.37547/ijasr-04-12-18

16K20F3 LATHE CNC MACHINE UPGRADE TO MILLING CNC MACHINE

Tadjibaev Rasul Karimovich Candidate of Technical Sciences, Associate professor, Fergana Polytechnic Institute, Fergana, Uzbekistan Rakhmonov Zaylobiddin Obbosbek ogli PhD student, Fergana Polytechnic Institute, Fergana, Uzbekistan

Abstract

The article discusses the practical experience of modernizing the 16K20F3 tool machine for tool processing.  It describes a deep modernization with a complete replacement of all drives, electrical and control systems. The goal is to consider the use of modernization of outdated metal-cutting equipment for modern technological tasks as one of the economically feasible options, alternative to the purchase of new expensive equipment. The use of aggregation allows in the process of modernization to create technological equipment for a specific group of products with the implementation of an optimal technological process. Simultaneous equipping of the machine with a modern control system, as well as assemblies and equipment for CAM technologies and HSM-technologies, allows you to get a qualitatively new equipment.

Keywords

Equipment, working parts, operation

References

William D.Callister, Jr., David G.Rethwisch. Materials Science and Engineering. An Introduction. Eight Edition. USA, Wiley, 2010.- 655-660 р.

XVI International Scientific-Practical Conference “Actual Problems of Improving Farming Productivity and Agroecology” (IPFA 2024) “Analysis of comparison of CNC milling machine-tools” https://doi.org/10.1051/e3sconf/202453804022

Vasilatxon Abdullaeva Yuldashali kizi, & Rakhmonov Zaylobiddin Obbosbek ugli. (2024). General insight into composite materials in science. Progress Annals: Journal of Progressive Research, 2(10), 1–5. Retrieved from https://academiaone.org/index.php/8/article/view/962

Vasilatxon Y. Abdullaeva. (2024). Advanced composite materials: innovations in mechanical properties and applications. E Conference Zone, 25–29. Retrieved from https://www.econferencezone.org/index.php/ecz/article/view/2950

Vasilatkhon Abdullaeva Yuldashali kizi & Rakhmonov Zaylobiddin Obbosbek ugli. (2024). Artificial intelligence in mechanical engineering. Western European Journal of Modern Experiments and Scientific Methods, 2(1), 7-12. https://westerneuropeanstudies.com/index.php/1/article/view/211.

Tadjibayev Rasul Karimovich, & Rakhmonov Zaylobiddin Obbosbek o’gli. (2023). Preparation for modernization of vertical cnc milling machine FP-17SMN4. Web of Scientist: International Scientific Research Journal, 4(04), 820–828. https://doi.org/10.17605/OSF.IO/CYEGQ

Tadjibayev Rasul Karimovich, & Rakhmonov Zaylobiddin Obbosbek O’gli. (2023). Modernization of cnc machines. European International Journal Multidisciplinary Research and Management Studies, 3(04), 107–113. https://eipublication.com/index.php/eijmrms/article/view/740.

Rakhmonov , Z. O. o‘g‘li, & Jaloliddinova , S. O. qizi. (2023). General insight into composite materials in science. Scholar, 1(20), 20–28. Retrieved from https://researchedu.org/index.php/openscholar/article/view/4476.

Xomidov , I. O. o‘g‘li, Rakhmonov , Z. O. o‘g‘li, & Xomidov, I. O. o‘g‘li. (2023). 16K20F3 lathe cnc machine upgrade to milling cnc machine. Scholar, 1(20), 29–35. Retrieved from https://researchedu.org/index.php/openscholar/article/view/4477

Siddiqov, B., & Rahmonov , Z. . (2023). Gaz dvigatellarida sovutish tizimining nazariy taxlili. Молодые ученые, 1(13), 11–17. извлечено от https://in-academy.uz/index.php/yo/article/view/20509

Article Statistics

Downloads

Copyright License

Download Citations

How to Cite

16K20F3 LATHE CNC MACHINE UPGRADE TO MILLING CNC MACHINE. (2024). International Journal of Advance Scientific Research, 5(12), 107-112. https://doi.org/10.37547/ijasr-04-12-18