In the work, the activated Ni-Co catalyst for the conversion of methane to carbonates was prepared by placing  γ-Аl2О3 in solutions of nickel and cobalt nitrates. The time dependence of methane conversion was studied for different catalysts. In these processes, CО2/CH4=1:1,41 1 ratio was obtained.

As a result of the research conducted, the methane effect of Co on Ni/Al2O3  catalyst for conversion. The following possible mechanism was proposed.

The purpose of the work is to study the effect of Co on the conversion of methane to carbonate, and the dependence of these processes on catalysts of different compositions, time and temperatures.

Nowadays, if the pole component is obtained due to the mixing of fibres in the technological process of spinning, the production of textiles that meet the high aesthetic and hygienic operational requirements and world demand has increased significantly. In the article, a comparative study of theoretical and experimental methods in the analysis of tissue structure and physical-mechanical properties, theoretical justification of the importance of thread parameters, research of ways to increase the hygienic properties of the tissue in the production of shirt fabrics, silk and the development of a new type of cotton thread tissue was comparatively analyzed.

In this article, the increase in the thermal load of engines running on gas fuel is considered. Simply put, after starting a cold engine, it first heats up, after which the processes of keeping the heat within the specified limits of the cooling system are studied.

This article provides a legislative analysis of extra-punishment coercive measures applied to minors, their application and their legal consequences. Information about the types of coercive measures applied to minors, their importance, role and difference from punishment, as well as information about the work of bodies applying coercive measures.

The article discusses the advantages of using axiological scales in the analysis of the level of values reflected in the Uzbek language proverbs. Axiolinguistics is a science that integrates axiology and linguistics and is interrelated with linguoculturology, psycholinguistics, sociology, and cognitology. Axiolinguistics has emerged as a result of highlighting the role of lexical units in the expression of axiological content. The article discusses the main goals, tasks and main issues of axioinguistics. Linguistic definition of evaluation and value, methods of evaluation are described. Scales are the methods of measurement and evaluation used in the exact and natural sciences. In recent years, as a result of the use of scales in the socio-humanitarian spheres, linguistic, psycholinguistic, axiolinguistic scales have emerged. The scale method evaluation level is also important in determining the norm of the relationship. The role of axiolinguistic scales in illuminating the content level reflected in the proverbs is illustrated by case studies. The results and conclusions are presented on the basis of the axiolinguistic scale. Recommendations for using this method are given.

President of the Republic of Uzbekistan Sh. Mirziyoev "Today, our Uzbekistan is rising to a new, higher stage of development based on the main principle: "From national revival to national rise." "During the large-scale reforms implemented in our country, the role and influence of the state language in our lives is increasing more and more," he said. In fact, today, when Uzbek language is given the status of the state language, when we celebrate it as a national holiday, it is very important to raise our language to a higher level.

The article covered the process of developing a wireless temperature monitor with a radio module for researching solar cells under heat and humidity conditions. Through this, the possibility of using the equipment and panels installed in the solar power plant in the organization of technical service was considered. The possibility of improving the quality of service has increased if the workers know the temperature and humidity of the solar cells while monitoring the amount of energy produced. In this article, we have implemented wireless communication between two Arduino microcontrollers and temperature and humidity monitoring using an NRF24L01 radio module, DHT11 sensor and display.

The article is devoted to the consideration of phraseological units-euphemisms related to the phraseological-semantic group of the socio-political sphere. The study of several euphemism dictionaries and selected material indicates that the appearance of a significant part of the units of this group is associated with the peculiarities of the political and social development of English-speaking countries, as well as other European countries. Concluded that it is the euphemistic function that is most suitable for veiling and hiding from the general public unsightly political and military actions nominated with the help of euphemism phraseological units.

The purpose of this article is to identify the most effective and common forms of political euphemisms, as well as the specific features of terminological changes.

The article proposes devices for the desalination of water from an underground source, in particular, they mainly concern the provision of environmentally safe water supply to the population with high-quality drinking and technical water.

The article describes the actual problem of automatic control of the linear density of cotton tape in the spinning of the textile industry. There are several methods for determining the linear density of cotton tape. In the article, the capacitive method of automatic control of the linear density of cotton tape is scientifically explained through formulas, block diagrams and diagrams.

Synchronous detectors are controlled by pulses from the corresponding power generator and, therefore, a signal is allocated that is proportional to the reflected radiation flux at the corresponding wavelength, which is then fed to the input of the information processing unit.

The given аrticle deаls with testing the validity of mаchines using strаin gаuges аs well аs the dynamic behаvior of a vehicle the forces and moments аcting on the wheels. The level of accuracy should be acceptable. Since all the tire models used in the literature calculate the tire forces and moments based on parameters which are difficult to measure or estimate online, in this paper a different approach is undertaken. A wheel rim from a formula student car was fitted with strain gauges and a study was conducted with respect to the feasibility to estimate the static load applied to it. The results of this research highlight the differences encountered and discuss possible solutions.

The article justified the urgency of ensuring the environmental safety of water intake and treatment facilities in water supply systems by creating a complex of specialized protective equipment. The operation of water supply systems was analysed, as a result of which it was determined that the environmental safety of water intakes was insufficient. To solve this problem, the scientific justification of the ecologically sustainable operation of the natural-technical system of the specialized type "natural water environment - water management complex - agricultural water supply system" was carried out. The proposed systematic approach to solving the vital problems of ensuring the environmental safety of water intake facilities of water systems is to provide high-quality water to consumers in any operating conditions (mud, suspension) of agricultural water supply systems. At the same time, the complex of water and intake treatment facilities improves the river ecosystem.

The social relations that arise in the release from responsibility due to the fact that the guilty person regrets his act, the conditions for the release from responsibility due to the fact that the guilty person regrets his act, and the criminal law norms regarding the basis of their application are analyzed.

In this article, the logical, systematic, logical-legal, comparative-legal methods of research are widely used. In particular, the formation of the doctrine of the crime compound and its stages of historical development are described in detail. Including, first of all, the most Continental (Romano-Germanic) and Anglo-Saxon (Common) from large law families the objective side of the crime structure in the doctrine of criminal law existing in the family of law and The concept of "actus reus" is scientific about them by the scholars of each family of law views, studies, similarities and differences between them described in detail. Also, the objective aspect of the crime and "actus reus" concept has been analyzed in comparative law and the problematic aspects in them are sequential described. In this article, the main focus is on the objective aspect of the composition of the crime advantages of signs and "actus reus-mens" in criminal law in the Anglo-Saxon legal family rea" on the "corpus delicti" (composition of the crime) consisting of a criminal act aspects related to the shortcomings of the theory are both theoretically and practically justified. At the same time, criminal law exists in the Anglo-Saxon (common) law family scientists in the doctrine J.Austin, M.Moore, D. Husak, J.Fletcher, H.Morris, M.Gore, A.Enker, W.Blackstone, G.Williams and Russian belonging to the continental (Romano-Germanic) family of law scientists A.N.Trainin, N.F.Kuznetsova, V.N. Kudryavtsev, D.M.Molchanov and others, as well as national scientists A.S.Yakubov, M.Kh.Rustamboev, S.S.Nayimov, M.Usmonaliev and Scientific works of P.Bakunovlar and others were used. At the same time, continental (Romano-Germanic) and Anglo-Saxon (common) law countries are crimes analyzed the criminal legislation of the Republic of Uzbekistan in this regard specific proposals and recommendations for improvement have been developed.

Music is a melody that reflects the inner emotional experiences of a person. "Music (Greek - art of muses) is an art form that reflects human emotional experiences, thoughts, imagination through the consistency or set of musical sounds (tones, melodies)." The genesis of music goes back to primitive times. There are different theories about this in science. Some researchers associate the emergence of music with a primitive ritual, some with the labor process, others with hunting processes (pre-hunting and post-hunting games).

In this article, we analyze the testing processes of optical communication systems and their fibre test aspects. There is considered the meaning and functions of the software applications. Optical communication systems have their equipment, fibres, and software applications. They have to work, in coordination. Therefore testing of equipment and other parts is completed by software applications.

This article describes the types of seams used in the process of manufacturing thermoplastic materials, which can be produced on the basis of new directions in the direction of sewing in the field of the light industry, which is developing year by year in our country.

Depending on the field of application and nature of high voltage generation technologies used in various economic sectors, several requirements are imposed, in particular, requirements such as service life, environmental safety, work efficiency and energy efficiency. In this work, a computer model for generating high voltages that are safe for humans using transistors designed to amplify semiconductor electrical signals is described.

One of the most important components of optical communication systems is optical amplifiers. By improving the performance of optical amplifiers, we will be able to achieve the optimality of the entire network. This article describes optical amplifiers and their types.

This article discusses the process of the piezoelectric effect observed in semiconductor materials, and the possibility of using piezoelectric elements that produce this effect in measuring technology. The prospects for the use of piezoelectric elements in various measurement techniques are considered.

In this paper, we consider the frequency dependence of the resistance of PbTe films. Establishing that the resistance of films containing an excess of lead up to 0.2 wt% decreases with increasing frequency of the supply voltage, and for samples containing more than 0.2 wt%, an increase in resistance is observed. At ω=3 10⁵, the difference in the resistance of the films decreases significantly and the resistance weakly depends on the frequency of the alternating signal

The article describes the characteristics and types of unevenness of semi-finished products of spinning production, as well as their influence on the quality of the finished product. A technique for performing spectral analysis of semi-finished products and calculating the wavelengths of the spectrogram is described. A spectral analysis of such semi-finished products as carding sliver and sliver from the first and second stages of draw frames with a linear density of 4.9 Ktex with a coefficient of variation (CVm) equal to 3.29%, 3.71% and 2.97%, respectively, was performed. Their wavelength was calculated taking into account the filling parameters of the studied machines. The reasons and places of formation of unevenness of semi-finished products are revealed and their assessment was given.

The article analyzes the operation of universal mowers in soil and climatic conditions, changes in dust content, air temperature in the regions and cultivation processes, as well as a negative impact on the quality of transmission oil.

We know that currently the automobile industry is developing in our country, and the number of automobiles is also increasing, and tires made from automobiles are also increasing in this article we have considered the processing processes.

The analysis of the disposal situation of used car tires showed that the problem of their recycling is global and there is no single point of view on its solution.

The market for the sale of recycled tires and the requirements for them were analyzed. The sequence of processing car tires is determined.

This article discusses all the laws considered for an ideal gas, taking into account the interactions of real gas molecules and their individual sizes.

In this article, the law of conservation of mass in nuclear reactions and intensive interaction due to the effect of nuclear forces, as a result of which nuclear changes occur, are described in detail through evidence.

The design of a school, as well as the design of other buildings, requires the achievement of strict compliance of the developed documentation with existing legislative norms and rules. The article discusses the design features of medical classes.

The article focuses on important problems of energy production and methods and means of its production, prospects of alternative energy, problems and new technologies of wind energy production.

In this paper, we consider the problem of classifying maximal approximatively finite pairs of discrete measurable partitions of type II Lebesgue space and construct a complete invariant for such pairs of partitions.

In this paper, we will show how to teach general topology by using traditional methods with examples and show some applications of the rules of topology, especially in the concept of continuity between topological spaces. The application will be given as a definition of society and education through the continuity of topological spaces.