TECHNOLOGICAL FEATURES OF THE WORK OF A DOUBLE-KNITTING MACHINE

Authors

  • Mirboboeva Gulhayo Abdusattorovna Lecturer, Department of Light Industry Technologies and Equipment, Fergana Polytechnic Institute, Fergana, Uzbekistan
  • Nabidjanova Nargiza Nasimjanovna Professor, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan

DOI:

https://doi.org/10.37547/ijasr-02-06-04

Keywords:

Knitting industry, production of knitwear, double knitting machines

Abstract

The light industry, and especially the textile industry, is increasingly attracting the attention of foreign investors. And this is no coincidence, because today a third of all workers employed in the industrial sector are concentrated in it.

Along with an increase in the share of processed cotton fiber, the leadership of the republic set before the workers of the textile industry a responsible task to improve the quality of products, increase export potential. This decision required the reconstruction and modernization of existing enterprises and the construction of new ones. One of the primary tasks in the field of light industry is the production of goods for the population, which leads to a fundamental improvement in both the quality and range of products, increasing their technical level and aesthetic expressiveness. It is planned to achieve high rates of development in the production of knitted goods. Knitting industry, taking into account the mastery of a number of product advantages, as well as efficient production technology,

Downloads

Download data is not yet available.

References

Ханхаджаева Н.Р. (2014). Прогнозирование технологических параметров рисунчатого интерлочного трикотажа. Проблемы текстиля. №3. С.24-32.

Далидович А.С. (1970). Основы теории вязания. М.: Легкая индустрия. 432 с.

Кудрявин Л.А., Шалов И.И. (1991). Основы технологии трикотажного производства. М.:Легпромбытиздат. 183 с.

Марисова И.И. (1984). Трикотажные рисунчатые переплетения. М.:Легкая и пищевая промышленность. 214 с.

Рискалиева Ф., Азимова Н., Ханхаджаева Н.Р. (2019). Свойства прессовых переплетений с мелкораппортным узором. В сборнике: Advancesin Scien- ceand Technology. борник статей XXIII международной научнопрактической конференции. Ташкент. С. 74-75.

Кохан А.Г. (1999). Автореф. дисс. ... канд. техн. наук С. Петербург, Государственный университет технологии и дазайна. СПб. 20 с.

Колесникова Е.Н., Бабинец С.В., Данилов Б.Д. Вязальное оборудование трикотажных фабрик. М., Легкая промышленность и бытовое обслуживание. 1985 г. 325 с.

Нешатаев А.А., Гусейнов Г.М., Савватеева Г.Г. (1987). Художественное проектирование трикотажных полотен. М.: Легпромбытиздат, 272 с.

Ровинская Л.П. Разработка теоритических основ и практических способов получения трикотажа пониженной материалоёмкости на кругловязальных машин. Дисс. ... докт. техн. наук. Л.; 1989. С.65-70.

Ubaydullayev, M. M., Ne'matova, F. J., & Marufjonov, A. (2021). Determination of efficiency of defoliation in medium-fiber cotton varieties. Galaxy International Interdisciplinary Research Journal, 9(11), 95-98.

Shadieva, G. M., & Kuvandikov, S. O. (2021). "Mahallabay" approach to assessing the role of family entrepreneurship in regional development. Экономика: анализы и прогнозы, (3), 122-126.

Mahmudova, G., & Toshmirzayev, Q. About automation of loading and unloading of cotton raw materials at cotton factory stations. ACADEMICIA An International Multidisciplinary Research Journal, ISSN, 2249-7137.

Жумабоев, А. Г., & Содиқов, У. Х. (2020). Технологический процесс получения углеводородных фракций из возобновляемых сырьевых материалов. Universum: технические науки, (1 (70)), 65-70.

Tadjikuziyev, R. M. (2022). Technology of repair of press molds for production of machine parts from steel coils, aluminum alloys. American Journal Of Applied Science And Technology, 2(04), 1-11.

Рахматов, К. Р. (2021). Radiofrequency ablation of facet nerves in the treatment of pain syndromes in degenerative diseases of the spine. Узбекский Медицинский Журнал, 2(5).

Ахунова, Ш. Н., & Абдуллаева, Б. (2015). Динамика и перспективы развития частного предпринимательства в Узбекистане. Журнал научных публикаций аспирантов и докторантов, (5), 23-25.

Абдуллаева, Б. Ю., & Жураева, Н. (2019). Основные причины формирования теневой экономики в предприятиях малого бизнеса. Апробация, (4), 68-71.

Ахмедова, Г. А., & Абдуллаева, Б. Ю. (2016). Современные методы диагностирования банкротства и особенности его применения в республике узбекистан. Журнал научных публикаций аспирантов и докторантов, (3), 5-8.

Usmonov, J. M., Shakirov, S. M., Ubaydullayev, M. M., & Parmonov, S. O. (2021). Aluminum-based composition materials for processing aluminum scrap. ACADEMICIA: An International Multidisciplinary Research Journal, 11(8), 590-595.

Tursunova, X.Sh., Ulug’boboyeva, M.M., Nabidjanova, N.N. (2020). Bahorgi-kuzgi mavsumbop ayollar paltosida yoqani modellashtirishning tahlili. Namangan.

Sh, T. X., Nizamova, B. B., & Mamatqulova, S. R. (2021). Analysis of the Range Of Modern Women's Coats. The American Journal of Engineering and Technology, 3(9), 18-23.

Baxtiyorovna, N. B. (2022). The features of pattern formation on flat knitting machines. International Journal of Advance Scientific Research, 2(02), 1-11.

Sarimsakov, O. S. N., & Sh, S. Z. X. (2020). Improvement of the Process in Disassembling of Cotton Stack and Transfering the Cotton into Pneumotransport. International Journal of Advanced Science and

Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research (AJMR), 10(2), 11-18.

Валиев, Г. Н., Хомидов, В. О., & Турдиев, М. (2018). Способ определения технологичности нитенатяжных приборов текстильных машин. Физика волокнистых материалов: структура, свойства, наукоемкие технологии и материалы [Текст]: сб. материалов ХXI Междунар. науч.-практ. форума «SMARTEX-2018», 26–28 сентября 2018 года.–Иваново: ИВГПУ, 2018.–304 с., 185.

Maxmudjon, T. (2021). The figurative expression of the composition of costume. Innovative Technologica: Methodical Research Journal, 2(10), 38-42.

Ismoilova, D. S., & Mamatqulova, S. R. (2021). Improving the system of electrical equipment of cars on the basis of adaptive power converters. Science and Education, 2(2), 110-114.

Mirboboeva, G.A., Urmonova, N.Q. (2021). Retro style in modeling women's clothing. Asian Journal of Multidimensional Research (AJMR), 10(9).

Мирзахонов, М., & Валиев, Г. Н. (2020). Разработка новой структуры плательно–костюмной ткани из натурального шелка Development of a new structure of dress-costume fabrik made of natural silk. In Сборник научных трудов Международной научной конференции, посвященной 110-летию со дня рождения профессора АГ Севостьянова (pp. 261-264).

Raxmatovna, M. S. (2021). The description of perspective fashion trends in men's clothing. Innovative Technologica: Methodical Research Journal, 2(10), 15-20.

Nabiyev, Q. Q., Yaqubov, N. J., & Toshtemirov, K. A. (2020). Innovative technology in the production of clothing from natural fibers. ACADEMICIA: An International Multidisciplinary Research Journal, 10(11), 1186-1191.

Mamatqulova, S. R., Nurmatov, D. X. O., Ergashev, M. I. O., & Moydinov, N. X. O. G. L. (2020). The influence of the qualification of repair workers on the efficiency of technical operation of automobiles. Science and Education, 1(9).

Baxtiyorovna, N. B. (2021). Analysis of New Assortments of Women’s Dresses Made of Knitted Fabric. Central asian journal of arts and design, 2(11), 4-8.

Хомидов, В. О., Валиев, Г. Н., & Турдиев, М. (2018). Устройство для испытания натяжных приборов текстильных машин. In Дизайн, технологии и инновации в текстильной и легкой промышленности (ИННОВАЦИИ-2018) (pp. 89-92).

Abdusattorovna, MG (2021). The Analysis of Modern Dress Models with the Involving of Retro Styles. Middle European Scientific Bulletin, 18, 377-383

Maxmudjon, T, Abdusattorovna, MG, & Qosimjonovna, UN (2021). The Relationships between Constructive and Technological Solutions in the Creation of Clothes. Central asian journal of arts and design, 2(11), 55-59

Мирбобоева, ГА, & Урмонова, НК (2019). Изделие-объект художественного мышления. Вестник науки и образования, 44-46

Downloads

Published

2022-06-27

How to Cite

TECHNOLOGICAL FEATURES OF THE WORK OF A DOUBLE-KNITTING MACHINE. (2022). International Journal of Advance Scientific Research, 2(06), 22-34. https://doi.org/10.37547/ijasr-02-06-04

Similar Articles

1-10 of 92

You may also start an advanced similarity search for this article.